Zum Seiteninhalt
compare-box

Professionelles DMX-Kabel

  • mit schwarzen 5-pol. XLR-Steckern
  • 5-pol. belegt
  • Länge: 50 cm
  • Impedanz: 110 Ohm
  • Kapazität: 72 pf
  • Konstruktion: 4x 0,25 mm²
  • PE Isolierung
  • geflochtene Abschirmung: 16 * 6 / 0,12 TC
  • PVC Außenmantel
  • Durchmesser: 8,0 ± 0,2 mm
  • Farbe: Schwarz

Hinweis: Kabelbinder nicht im Lieferumfang.

  • Erhältlich seit September 2010
  • Artikelnummer 249328
  • Verkaufseinheit 1 Stück
  • Farbe Schwarz
  • Länge 0,5 m
  • Von Stecker XLR 5-pol male
  • Auf Stecker XLR 5-pol female
  • Längen-farbcodiert Nein
  • IP65 oder höher Nein
  • Kombikabel Nein
  • mit Kabeltrommel? Nein
5,50 €
Alle Preise inkl. MwSt.
Mengenrabatt
Stückpreis Sie sparen Menge
5,50 € 1
5,40 € 1,8% 5
5,30 € 3,6% 10
Sofort lieferbar
1
Standardlieferung
3,90 €

Schnelle Lieferung
5,90 €

Express-Option im Checkout verfügbar. Bestellen Sie bis 13:00 Uhr für schnellstmögliche Lieferung.

42 Kundenbewertungen

4.8 / 5
Jetzt bewerten

Verarbeitung

10 Rezensionen

N
Gutes Kabel
Nail 19.10.2014
Etwas dick und starr, keine Neutrik-Stecker. Aber für den Preis bekommt man das nun mal nicht. Ist aber egal, weil die Qualität von Kabel und Stecker dennoch ganz OK ist. Dafür, dass die 5 mal im Jahr am Patch-Bay umgesteckt werden, reicht es natürlich gaaaaanz locker.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

A
Gut!
Anonym 22.05.2014
Mit diesem Kabel hatte ich noch gar keine Probleme.

Allerding frage ich mich warum der Mantel einen größeren Querschnitt hat als die längeren Kabel der gleichen Serie, aber das ist ja eher besser als schlechter.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

Ca
Ist ein Kabel...
C. aus E. 17.07.2013
... und tut was es soll. 50cm sind zum Verpatchen zweier Dimmerpacks in meinem Fall reichlich lang, das Kabel ist solide verarbeitet.
Verarbeitung
0
0
Bewertung melden

Bewertung melden

google translate gb
Leider ist ein Fehler aufgetreten. Bitte wiederholen Sie diese Aktion später.
t
Good for the price but not the best build quality Für den Preis gut, aber nicht die beste Verarbeitungsqualität
thelxman 08.09.2020
All 5 pins are wired (4 cores plus screen). The total length is 50cm from the tips of each connector. Perfect for what I wanted for dimmer daisy-chaining. Cable jacket printed as DMX cable (not mic cable) and is quite chunky but reasonably supple.
This is the "pro snake" but still no-name connectors and price reflects that. However the connectors do have the "chuck" type cable restraint like you find on Neutrik connectors. Opened one end up to check the build quality and the soldering wasn't the best I'm afraid and the insulation sleeves over the solder buckets were all loose and all over the place (not heatshrunk). Good for the money but would have been happy to pay a little more for a better build quality.
All 5 pins are wired (4 cores plus screen). The total length is 50cm from the tips of each connector. Perfect for what I wanted for dimmer daisy-chaining. Cable jacket printed as DMX cable (not mic cable) and is quite chunky but reasonably supple.
This is the "pro snake" but still no-name connectors and price reflects that. However the connectors do have the
All 5 pins are wired (4 cores plus screen). The total length is 50cm from the tips of each connector. Perfect for what I wanted for dimmer daisy-chaining. Cable jacket printed as DMX cable (not mic cable) and is quite chunky but reasonably supple.
This is the "pro snake" but still no-name connectors and price reflects that. However the connectors do have the "chuck" type cable restraint like you find on Neutrik connectors. Opened one end up to check the build quality and the soldering wasn't the best I'm afraid and the insulation sleeves over the solder buckets were all loose and all over the place (not heatshrunk). Good for the money but would have been happy to pay a little more for a better build quality.
Alle 5 Pins sind beschaltet (4 Adern plus Schirm). Die Gesamtlänge beträgt 50 cm ab den Spitzen jedes Steckers. Perfekt für das, was ich für die Verkettung von Dimmern wollte. Der Kabelmantel ist als DMX-Kabel (kein Mikrofonkabel) bedruckt und ziemlich klobig, aber einigermaßen geschmeidig. Dies ist die „Pro-Schlange“, aber immer noch No-Name-Anschlüsse, und der Preis spiegelt dies wider. Die Steckverbinder verfügen jedoch über die Kabelhalterung vom Typ „Chuck“, wie Sie sie bei Neutrik-Steckverbindern finden. Habe ein Ende nach oben geöffnet, um die Verarbeitungsqualität zu überprüfen, aber die Lötung war leider nicht die beste, und die Isolierhülsen über den Lötzinnen waren alle lose und überall herum (nicht wärmegeschrumpft). Für das Geld gut, aber für eine bessere Verarbeitungsqualität hätte ich gerne etwas mehr bezahlt.
Verarbeitung
0
0
Bewertung melden

Bewertung melden